DIL
FrymaKoruma DIL Inline Homogenizer
The DIL inline homogenizer is the ideal solution for continuous processing of emulsions and dispersions.
Key Advantages
- Highly powered device working on the rotor/stator principle
- High pumping efficiency, due to design of rotor and stator
- Multi-chamber system (dispersing and homogenizing zone)
- Robust stainless-steel design, suitable for handling practically all products
- Easy to integrate into a closed pipeline system (inline system)
Utilities
- Power supply standard 400 V / 3 phases, 50 Hz
- Other voltages and frequencies available on request
Material Specifications
- Product contact parts in AISI 316L stainless steel (1.4404, 1.4435)
- Seals in EPDM as standard (other materials on request)
Operating Conditions
- Temperature : 0° - 80°C
- Air humidity : 0 - 80%
- Ambient air : as dust-free as possible
DIL Inline Homogenizer
Versions
- Standard inline system for installation within an enclosed pipeline
- Design with hopper on suction side and mobile recirculation and discharge pipe for liquid and low viscosity products
- Inline system with vertical product inlet for viscous products
Specification of Standard Components
Mechanical
- Single-acting mechanical seal (Cartridge), elastomers EPDM
- Other mechanical seal systems on request
Additional Options
- Alternative construction materials
- Frequency converter
- Sterile version (Pharma finish)
- EEx-protection
- Double-acting mechanical seal with option for sealing liquid system
- Discharge and/or supply pump
- Hopper
Design Criteria
All product contact parts are easy to access and change over. Design and construction in accordance with current GMP and
hygiene standards. Inline cleaning (CIP) possible in most applications.
Functional Description
The DisHo Inline (DIL) employs rotor/stator technology within a multi-chamber
system. The first chamber houses a special mixing and feeding group; subsequent
chambers contain a toothed rotor/stator homogenizing system. This model is
suitable for producing emulsions and suspensions within a wide viscosity range.
Product is fed via a pump. In the multi-chamber the product is subject to
an initial mixing phase, then pumped to the homogenizer. Excellent product
quality is assured thanks to the high shear forces exerted on the product in the
shearing gap and maximum product movement at the outfeed. When processing
emulsions, the machine achieves droplet sizes down to 1 ìm, with fine
distribution. In the case of suspensions, powders and solids are wetted
thoroughly and agglomerations dispersed prior to homogenization. The principal
application for this model is as an inline system but it can also be installed
beneath vacuum processing units in either horizontal or vertical configuration.
Fineness of the end product is determined by the dispersing tool selected - a
wide range is available.
">Brochure Inline
Homogenizer