TELESCOPING CHUTE
PEBCO®'s Telescoping Chute Features:
- Simplicity and proven rugged design
- Stability in high winds
The Chute
- Construction can be in any number of sections and diameters depending upon individual requirements.
- A wide variety of sizes and lengths are available.
- Sections are rolled with exacting fabrication practices to insure concentricity.
- Heavy rings reinforce both ends of each section for optimum structural integrity.
Controls
- An adjustable geared switch limits both extremes of chute travel.
- An additional limit switch provides a redundant means of control at the upper extreme of travel
for added safety.
- A slack cable sensing units are located at the bottom of the chute; chute rises automatically
as pile height increases.
- An electric cable reel and cable is included for the sensing units.
Actuation
- A grooved drum power winch with electrically released, mechanically applied brake is used.
- Wire rope used in IWRC Premium Grade, sized for a minimum of 5:1 safety factor.
Telescoping Chute
Options
- Construction of abrasion resistant steel, Corten, mild steel, various stainless alloys, or other
materials.
- Liners or abrasion resistant steel, UHMW, stainless steel.
- Local or remote control panels with a wide range of control options.
- Electricals for hazardous or extreme environments.
- Sensing devices for pile height and chute position.
The Telescoping Chute is used for abrasive or large particle size materials on stackout systems, barge
loading an high tonnage loading applications.
