FLAPPER VALVE
PEBCO®
is committed to providing the highest quality equipment at the most
reasonable price. Through a combined effort between manufacturing and
engineering personnel, we have improved our design and manufacturing
procedures on Flapper Valves and Double Flapper valves. The end result
is PEBCO®'s high quality at a reduced price.
The throat is constructed of four pieces of metal and
positioned straight down. Unlike our original design, there is no
impingement upon the flow area. The blade and the throat are both
constructed of 400 brinell abrasion resistant steel.
The
blade seating surface and inlet throat seat are both machined for
optimum sealing. Blade to be 5/8" star 360, which can be ground to a
minimum 1/2" to attain flat seat.
The shaft seals are no longer the packing glands with
outboard bearings. We are now using pressure loaded shaft seals inboard
of the bearing. This design will allow use in both pressure and vacuum
applications. The bearings are still protected from the ingression of
contaminants since they are located outboard of the shaft seals. The
Flapper Valve blade is removable for maintenance and replacement.
The heavy-duty PEBCO® Flapper Valve (FV) has:
- Easy access for maintenance
- Few moving parts
- Flat contact sealing surfaces
- Superior wear characteristics on abrasive materials
- High temperature capability
Flapper Valve
This valve is typically found in high temperature or abrasive applications. It handles ash, clinker and stringy materials.