The mid-belt RS sampler, designed to sample up to 4” material including coal, limestone, ores and woodchips, features
low maintenance and heavy-duty construction. The low cost design is proven to provide installation with ease.
The RS can be installed anywhere on the belt where it can obtain a sample which can be delivered to ground level. On command
from an automatic or manual controller, an unattended rotating sample cutter, with wiper seal, takes a pass across the moving
belt. This sampler obtains a representative and repeatable sample, including fines.
Other benefits included with the Mid-Belt RS Sampler from Intersystems are:
less auxiliary equipment required • direct motor drive - no belts or chain
clean sweep brushes or wipers that touch belt to get complete sample
metal scoop does not touch or damage belt • use in horizontal or inclined applications
meets ASTM D-2234 specifications
CONTROLS
The standard units allow for manual and automatic sampling operations. These
units can handle a wide variety of voltages and frequencies and can be constructed for most environments.