Automatic Industrial Sampling

automatic industrial sampling

HD-PRT

HEAVY DUTY MODEL

The HD-PRT belt end sampler model from Intersystems provides representative and repeatable samples, employs very simple and reliable operation and uses minimum headroom. It samples fines, small or large particles and works with abrasive materials.

Mounting may be in chutes, hoppers, at belt-end or head chutes. When activated, a slotted sample tube enters the product stream with the slot facing down. While fully extended, the sample tube rotates 270 degrees, taking a representative sample through the product stream. The sample tube then retracts out of the product stream, into the sampler housing and deposits the sample into the discharge. The sample tube can be driven pneumatically or hydraulically.

SAMPLE TUBE OPERATION

At rest & retracted – tube then begins to enter product stream at the 6 o’clock position
As the tube moves through the product stream it rotates from the 6 to 3 o’clock position while collecting sample
After collection, tube retracts back into the HD-PRT sample
Retracted, the tube rotates back to the 6 o’clock position & releases sample into the chute – ready to repeat

STANDARD CONSTRUCTION
Heavy gauge carbon steel housing
304 stainless steel sample tube

CONTROLS
Intersystems control packages are available to suit any sampling control application. The standard units allow manual and automatic sampling

operations. These units can handle a wide variety of voltages and frequencies and
can be constructed for most environments.

POWER REQUIREMENTS
Electric: 110V single phase control
Pneumatic: 80 to 100 PSI