 |
PRODUCT INFORMATION
BLENDERS
Laboratory Blenders |
Gemco's laboratory blenders provide a multi-capability approach to research and development and pilot applications.
Solids blending, de-lumping, liquid addition, and agglomerations are easily accomplished in minutes. For many applications
the units can also function as reaction vessels as well.
Gemco lab blenders are actually scaled down versions of full product blenders. Each incorporates Gemco's traditional
dual trunnion design frame with full ball bearing support. Each provides the optional ability to add liquids either
with standard gravity feed or with the revolutionary Airless Liquid Injection System. In short, a Gemco lab blender
is an invaluable additional to any R&D or Pilot Operation.
Support Enclosures
Full 316 stainless steel support enclosures are standard on every Gemco lab blender. These protect the motor drive
and vessel supports and help maintain sanitary conditions around the blending area. The motors are not in the discharge
area so potential damage from material spills is eliminated.
Size
All Gemco lab blenders are 16 quart capacity. This allows a working capacity of 4-16 quarts. For systems with optional
agitators, batches of less than 50% of capacity may be run with the use of optional cover insert scoops (available
on Double-Cone and Slant-Cone). These scoops lift the material off the bottom and drop it on the agitator for effective
small batch blends. 
Standard Features:
- 16 quart Nominal Working Capacity
- Acrylic Plastic or 316 Stainless Steel Vessels
- 316 Stainless Steel Support Enclosures with 2B Polish
- Standard Designs for Material Densities up to 250 lbs./ft.
Optional Features:
- Cantilever Agitator Bars
- Exclusive Seal & Ball Bearing Design
- Cover Scoops to Process Small Batches with Agitator
- Separate Hour Meters for Main and Agitator Motors
Northland Engineering Sales represents Gemco and other manufactures products in North
Dakota, South Dakota, Minnesota Iowa And Wisconsin Please contact us about
Gemco Products.
PH. 651-738-7144
e-mail
If you are located outside of the 5-State Area please contact Gemco Direct for a representative in your area.
301 Smalley Ave. Middlesex, NJ 08846 732-752-7900 800-OK-GEMCO
www.GemcoValve.com