FERROPLATE PLATE MAGNETS

If you’re engaged in bulk processing — food, grain, chemicals, plastics, pharmaceuticals, minerals, etc. — protect your valuable equipment and your customers from tramp metal contamination with a Dings Ferroplate plate magnet. The high surface strength of magnetic plates makes them ideally suited for sloping chute applications. Dings Ferroplate magnets are available as a plate to be installed in an existing process or preinstalled in a variety of Ferroplate equipped products.


			Dings unique design features raised pole pieces to provide better protection. Since the strongest magnetic field on any plate magnet is between the two poles, most of the tramp metal will accumulate in the gap between the poles. The Ferroplate’s raised magnetic pole pieces create a recess in this area which holds the attracted metal more securely than designs which have a narrow raised strip between the poles. Dings Ferroplate magnets are offered in five different styles with varying magnetic strengths to work in a variety of applications:
Ferroplate Model Selection Table
MAXIMUM DEPTH OF MATERIAL (in inches)	3"	3 1/2"	4 1/2"	5 1/2"	6 1/2"
MATERIAL IS: Free flowing, dry, loose, granular	2100	2200	2300	2400	Ultimate
Moist, fibrous	2200	2300	2400	Ultimate
Dense, wet, viscous, liquid	2300	2400	Ultimate

Dings Ferroplate Equipped Products For applications where the installation is not in a rectangular, sloping chute, choose from this line of magnet equipped products:
Perma Chute Perma Chute magnets are designed for applications where space is limited, materials can’t pass freely through a grate magnet, or when the chute is too vertical for a plate magnet to work effectively. A Quick Clean model is also available with a built-in drawer for disposing of the separated metal.

	Magnetic Hump These specially shaped separators are used in rectangular chutes or round pipes where flow speeds and depths exceed the capacity of plate magnets. Humps are recommended if the flow is vertical, or if the angle of the chute is more than 70 degrees. An Easy Clean model with pneumatic self-cleaning mechanism is also offered.

Round Pipe Separator This separator allows Ferroplates to be used on round, sloping chutes carrying dry material.If has a plate magnet mounted on a rectangular center section, with round adapters on each end.

	Hydro Hump Ferroplates in an angled housing remove ferrous contaminants in a liquid pipeline. It has a pressure tight design and 150 lb. flange fittings on both ends.

Dings Magnets 4740 West Electric Ave. Milwaukee, WI 53219 Telephone: 414-672-7830 - Fax: 414-672-5354